|
|
|
|
|
|
M7 Rear Lower Diffuser Tunnels
|
Our Price: $699.00
|
|
|
Race teams install them for the downforce... Show cars use them for that extra punch in character... And now you'll be able to do both!
M7 proudly presents to you the M7 Rear Lower Diffuser Tunnels designed for the JCW Aero Kit (R56 only).
Ever since the MINI was redesigned, a lot of doors for new products were flung open. Luckily for you, whether you're the fastest car in town or on the track, this means that an under-body diffuser system is finally possible without hacking away at a battery box, or relocating your exhaust.
Our rear lower diffuser system not only looks aggressive, but it helps your performance jump up another level. The tunnels redirect the high speed air flow under the car to transition smoothly into the low pressure vacuum created at the rear of the car as it moves forward. Smoothening out the air flow under the car helps to reduce drag on the vehicle while also increasing downforce.
The diffuser tunnels attach to your vehicle using special brackets that utilize pre-existing mounting locations as well as the rear bumper.
The M7 Diffuser Tunnels are available in two finishes: fiberglass ($699) and stunning Carbon Fiber ($899). The two smaller diffuser pieces of the set (located ahead of the rear control arms) are fiberglass for both finishes. The small center wing between the two large tunnels comes in black anodized aluminum for both finish options.
Please note BEFORE placing order:
- The AirTab vortex generators seen in some images were part of a pre-production prototype and are NOT available on the final production version.
- The center wing under the exhaust tips in the images is a pre-production piece. The final version features a black anodized aluminum wing as opposed to the silver one seen in the images.
- Shaping of the rear bumper insert is necessary. The tunnels were designed around the JCW Aero Kit and are not meant to fit the Standard Bumpers or OEM Hypersport Body Kit.
- Due to construction, the Rear Diffuser Tunnels are available for the R56 only. Installation on a R53 would require custom brackets, exhaust, as well as relocation of the battery box.
Applications:
2007+ MCS (Coupe with JCW Aero Kit)
NO Clubman application at this time.
|
|
|
|
|
|
|
|
|
|
|
|
|
M7 Vortex Scoop
|
|
Our Price: $229.00
|
|
|
Let's face it: Removing the plastic cover from your stock hood scoop just isn't delivering air the way you thought it would. Don't worry, M7 has you covered once again. We're proud to bring you the M7 Vortex Scoop! This is a great enhancement for those that have replaced their stock airbox with a reusable cone filter or other intake replacement. Of course, most benefit comes to those with the AGS-R installed as the Vortex Scoop was designed primarily around this R56 intake system.
This Vortex Scoop replaces your stock hood scoop with a larger opening and more aggressive appearance. Vortex generators are placed on the surface of the scoop to help steady any air flow rushing into the scoop's opening.
While this scoop was designed with the M7 AGS-R in mind, it can be used by owners looking to improve the appearance of their R56. The M7 Vortex Scoop also adds another avenue for cold air to enter the engine bay.
Please Note:One hole will have to be drilled for proper attachment of the scoop to the hood. Feel free to call with concerns. As with all of our fiberglass scoops, the Vortex scoop comes unpainted with a black gel coat ready to be prepped and painted by your local paint shop.
|
|
|
|
|
|
|
|
|
|
|
|
|
M7 Ram-2 Scoop
|
|
Our Price: $229.00
|
|
|
Following in the footsteps of its older brother, the Ram-2 provides a more aggressive scoop opening than stock but one that is not as extreme as the Vortex hood scoop. The Ram-2 is a great compliment to many of the available after market air intake systems especially the M7 AGS-R and Super AGS. Even if you're running the OEM intake system, the Ram-2 will allow more air to enter your engine bay, thus helping in keeping things cool under the hood.
The installation process is very simple and does not require any modification to the hood at all. Simply remove your stock hood scoop and bolt this one down in its place.
If you're looking for more air to get into your engine or to your intake but you're not too fond of our Vortex Scoop's extreme look, then the M7 Ram-2 Scoop is for you!
Please Note:One hole will have to be drilled for proper attachment of the scoop to the hood. Feel free to call with concerns. As with all of our fiberglass scoops, the Ram-2 scoop comes unpainted with a black gel coat ready to be prepped and painted by your local paint shop.
|
|
|
|
|
|
|
|
|
|
|
|
|
M7 Ultimate Lower Front AERO Grilles
|
|
Our Price: $239.00
|
|
|
Here's a towel, wipe up that drool. If you thought your JCW Aero Kit made your car stand out, wait until you install these grilles! Continuing the Ultimate Grille line of products, the M7 Ultimate Lower Aero Grilles (R56) are the best visual upgrade for the front of your MINI.
Not only do these grilles look great, but in typical Ultimate Grill fashion they improve airflow by opening up more surface area in the front end for your radiator and intercooler. This works greatly in favor of those who have an aftermarket front mount intercooler installed on the car!
These grilles are of the highest quality. As hard as you try with a DIY-Home-Depot mod, you won't get the clean shape and uniform look that these grilles provide. They'll make your front end look so hot and aggressive you'll wish they came on the car in the first place!
NOTE: This 3-piece set includes two grilles that install over the fog lights (still fully functional) and the large center grille. As with previous versions, these are available in either a black or silver powder coat finish.
|
|
|
|
|
|
|
|
|
|
|
|
|
M7 Ultimate Upper Grille R56
|
|
Our Price: $159.00
|
|
|
The R56 generation of MINIs brought out a great deal of changes from the R53. One thing that unfortunately remained the same was the use of plastic grilles on the front end of the vehicle. Lame? Yea, we thought so, too.
M7 now brings the same quality and finish of our Ultimate Grilles to the R56. Give your MINI the look it should have had from the factory! As with the previous design of Ultimate Grilles, this new design for the R56 offers increased airflow to the engine bay while giving your MINI a more aggressive sports car look. Held in place with extremely durable stainless steel fasteners, the Ultimate Grilles require no zip ties or similar short-lived devices for attachment to the car.
Please Note: For the best look, cutting of stock grilles and painting of some surfaces is necessary. These processes are optional and the grilles will install without any problems if you choose not to undertake in cutting or painting.
We also offer the OEM Aero Kit Grille Bezel (As seen in pictures). This is also optional for installation, but we feel it helps improve the look.
|
|
|
|
|
|
|
|
|
|
|
|
|
M7 Carbon Fiber Front Splitter R56
|
|
Our Price: $299.00
|
|
|
Following the popularity of the original M7 Carbon Fiber Front Splitter, we've now come out with an application for the R56 generation!
Our splitter comes with two adjustable attachment rods to customize the amount of down force on the front of your MINI. The complete attachment system also prevents your splitter from falling off during high speeds unlike other splitters on the market.
Great looks and superb functionality make this a great addition for the MINI owner looking for show, go, or both!
|
|
|
|
|
|
|
|
|
|
|
|
|
M7 Carbon Fiber Front Aero-Splitter R56
|
|
Our Price: $324.00
|
|
|
Following the popularity of the original M7 Carbon Fiber Front Splitter, we now have an application for the R56 JCW Aero Kit!
Our splitter comes with two adjustable attachment rods to customize the amount of down force on the front of your MINI. The complete attachment system also prevents your splitter from falling off during high speeds unlike other splitters on the market.
Great looks and superb functionality make this a great addition for the MINI owner looking for show, go, or both!
|
|
|
|
|
|
|
|
|
|
|
|
|
M7 Stubby Antenna R56
|
|
Our Price: $25.00
|
|
|
When the new MINI came out, it was obvious that it preserved many of the characteristics of its predecessor: small overall size, unmatched handling, eye-catching style and a HUGE antenna! The stock antenna comes in at a whopping 16 inches in length. The M7 Stubby Antenna measures only 3 1/2 inches while still receiving the same amount of radio clarity as with the factory antenna. Our antenna is made of aluminum and comes in a stunning black anodized finished with stainless steel attachment threads.
Show others on the road that you mean business with the sporty looking M7 Stubby Antenna!
Applications
2007+ MC and MCS (Coupe)
2008+ MC and MCS (Clubman)
|
|
|
|
|
|
|
|
|
|
|
|
|
The 'NO HOLES' License Plate Bracket Kit
|
|
Our Price: $55.00
|
|
|
Here is the original 'NO HOLES' LPB Kit.
|
|
|
|
|
|
|
