Join our mailing list!
You are here: Home > Performance Parts > MINI R56 Cooper S 07+ > Brakes
Sort By:
Page of 1  
AP Racing 4-Piston Big Brake Kit
Our Price: $1,590.00

For a big upgrade at an affordable price, 1FastMINI offers world renown AP Racing 4-piston calipers running on 1-piece and/or 2-piece rotors. Each kit is designed to work with the original equipment master cylinder, ABS and traction control systems. Specially-designed rotors are cross-drilled and slotted, the optimum for high-performance street, autocross and occasional track day use. The curved vane construction provides for maximum cooling when pushing hard. 2-piece kits come with aluminum alloy hats for better thermal management and maximum weight reduction. DOT-compliant and TÜV-approved stainless steel lines are included to top off the upgrade and provide a huge improvement in pedal feel and stiffness. Brackets and hardware are made from aerospace-grade materials and high-strength fasteners. All AP Racing kits are complete with no other parts required. Install, bleed and go! Many kits require 17" wheels or larger with sufficient spoke clearance. check your wheels before ordering. Put decades of championship-winning experience on your car. It's not just for Formula One and NASCAR winners anymore. Or LeMans, or British Touring Cars, or WRC, or Grand Am, or Super GT, or DTM...
Third Brake Light PULSAR Gen2 with SmartPulse
Our Price: $29.95

These units will flash your third center brake light about after you apply your brakes and then brake light will remain on without flashing as long as your brake lights are on.  

Using surface mount technology, this little unit was designed to be as small as we could get it for our MINI's and it fits nicely into the third brake light cavity.



Just like our Gen1, this is silent during operation.  No clicking!

This second generation has been designed to handle all brake light fixtures.  It can be used on either LED lights or incandescent bulb lights.   It is still very small and can still easily fit into the MINI.  

The second generation allows you to select Long or Short pulse duration during installation by moving the jumper by the S and L.  The Short setting pulses the light about 6 times while the Long pulses it about 10 times.

After getting many requests from owners who live in high stop and go traffic areas like Los Angeles, we developed the second generation PULSAR with SmartPulse technology.  When in stop and go traffic, SmartPulse will stop the third brake light from pulsating.  When you hold your brake pedal down for more than 12 seconds and then reapply your brake within 9 seconds, this unit will not pulse the third brake light.  It will come on solid.  When you reapply your brakes after 12 seconds, the unit will pulse your third brake light again.

If you do not wish to have the SmartPulse enabled, simply remove the jumper at J4 and the unit will behave like a gen1 PULSAR.

Installation is very simple.  Unscrew your third light, connect to the wiring and reinstall the light.