|
|
|
|
|
|
M7 Pre-Intercooler Charge Pipe
|
Our Price: $135.00
|
|
|
The M7 Pre-Intercooler Charge Pipe is a silicone hose that runs from the turbocharger’s outlet to the intercooler’s inlet, replacing the stock piping between these two components. The OEM parts were designed from the factory to silence any sound by breaking up the air path with restrictive piping.
With the M7 Pre-Intercooler Charge Pipe, the charged air coming from the turbocharger sees nothing but the smooth inner walls of the tubing and smooth mandrel bends allowing uninterrupted airflow to the intercooler.
On the dyno, installation of the M7 Pre-Intercooler Charge Pipe resulted in gains of 3.6 horsepower and 11.3 ft-lb of torque AT THE WHEELS!
Increase your MINI’s performance while sprucing up the engine bay with a little color.
Available in Black, Red, or Blue finish!
|
|
|
|
|
|
|
|
|
|
|
|
|
M7 Front Mount Intercooler
|
|
Our Price: $799.00
|
|
|
Following the success of the DFIC for the R53, we here at M7 knew that the turbo R56 owners couldn't wait for such a great enhancement in performance. We took all of the great ideas behind the DFIC and brought them to the M7 R56 Front-Mount-Intercooler.
• The core is much larger in comparison to the stock intercooler. It's exposed to the entire opening in the front bumper thus allowing for better cooling ability, all while looking clean enough to be OEM.
• Core fin design allows for minimal back pressure ensuring max airflow through the intercooler.
• Dual monitoring ports allows for an easy way to monitor boost pressure or charge temperature without drilling into other areas of the engine.
• Utilization of the stock charge pipes means no other modifications or new parts are necessary.
• Made in the good ol' USA for availability and better quality control
• Simple installation with hand tools and floor jack.
Avoid the dreaded heat-soak and give your R56 the cooling it deserves with the M7 R56 Front Mount Intercooler!
|
|
|
|
|
|
|
|
|
|
|
|
|
CryO2 System
|
|
Our Price: $393.33
|
|
|
The foundation to every CryO2 System. Must have this kit to utilize CryO2 components. The kit includes a 10 pound CO2 tank, cryogenic solenoid valve, all necessary fittings, 14 ft. stainless steel hose, full wide open switch, arming switch and a wiring kit. Only one kit is needed to operate all the CryO2 components.
|
|
|
|
|
|
|
|
|
|
|
|
|
CryO2 Intercooler Sprayer R56
|
|
Our Price: $98.67
|
|
|
The CryO2 Intercooler Sprayer mounts directly to the front of the intercooler or aftercooler and vents the liquid CO2 directly onto the cooling fins, thus enhancing the performance of the intercooler by more than 50%. This component must always be the last in the CryO2 system as it vents the liquid CO2 charge.
NOTE: This is for use on aftermarket intercoolers only.
Due to the factory intercooler being so small this will not fit.
|
|
|
|
|
|
|
